Grizzly T27338 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Nail Gun
  5. T27338
  6. Owner's manual

Grizzly T27338 Owner's Manual

3-in-1 flooring nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL T27338
3-IN-1 FLOORING NAILER
OWNER'S MANUAL
(For models manufactured since 01/15)
COPYRIGHT © AUGUST, 2016 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL18231 PRINTED IN CHINA

Advertisement

Table of Contents
loading

Related Manuals for Grizzly T27338

Summary of Contents for Grizzly T27338

  • Page 1 OWNER'S MANUAL (For models manufactured since 01/15) COPYRIGHT © AUGUST, 2016 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL18231 PRINTED IN CHINA...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Section 1: Safety

    Keep work area well lighted. DO NOT USE UNDER INFLUENCE OF DRUGS OR ALCOHOL. Model T27338 (Mfd. Since 01/15)
  • Page 4 Regularly inspect tool for any con- tools lubricated and clean for best and dition that may affect safe operation. safest performance. Follow instructions Immediately repair or replace damaged or for lubricating and changing accessories. mis-adjusted parts before operating tool. Model T27338 (Mfd. Since 01/15)
  • Page 5 Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment, or poor work results. Model T27338 (Mfd. Since 01/15)

  • Page 6: Section 2: Introduction

    For your convenience, we post all avail- able documentation on our website at Grizzly Industrial, Inc. www.grizzly.com. Any updates to this doc- C/O Technical Documentation Manager ument will be reflected on our website as P.O. Box 2069 soon as complete.
  • Page 7 Handle Grip Handle Air Inlet/Quick-Connect Fitting Magazine Cover Magazine Head Cap Lock Button Magazine Pusher Base Guide Plate To reduce your risk of serious injury, read this entire manual BEFORE using tool. Model T27338 (Mfd. Since 01/15)

  • Page 8: Section 3: Setup

    SECTION 3: SETUP Unpacking Inventory Your tool was carefully packaged for Model T27338 Inventory (Figures 1-2) A. Flooring Nailer Body ......1 safe transportation. Remove the packag- B. Arm ............ 1 ing materials from around your tool and inspect it. If you discover the tool is dam- C.

  • Page 9: Compressed Air System

    Compressed Air System The Model T27338 is designed to be oper- ated at 70-115 PSI using clean, dry, regu- lated, compressed air. DO NOT exceed the 115 PSI maximum operating pres- sure for your model. Before using, regu- late the air pressure on your air compres- sor to 70 psi.
  • Page 10 (2) 8mm flat washers and (2) M8-1.25 lock nuts, as shown in Figure 5. L-Bolt Figure 5. L-Bolt installed. Tip: Place thread locking compound on lock nuts before threading onto L-bolts, to prevent nuts from loosening. Model T27338 (Mfd. Since 01/15)
  • Page 11 — If nailer does fire, immediately dis- connect nailer from air source and call (570) 546-9663 for Technical Support. Point nailer at ground when con- necting to air source. NEVER aim in direction of another person or body part. Model T27338 (Mfd. Since 01/15)

  • Page 12: Section 4: Operations

    SECTION 4: OPERATIONS Loading Nailer EYE/EAR INJURY The Model T27338 shoots both nails and HAZARD! staples. Wear protective equipment when Nail Replacement Guidelines using this tool. ACCIDENTAL START HAZARD! 16 Ga. Disconnect before " Cr L- or T-Cleat Nail "...
  • Page 13 Changing Guide Plate 3. Open magazine cover and slide strip of nails or staples pointed-end down into magazine, as shown in Figures 8–9. The Model T27338 comes with a pre- Magazine Cover L-Cleat Nails installed ⁄ " guide plate and a ⁄...

  • Page 14: Operating Nailer

    DO NOT use nailer to position flooring strips. Note: Test nailer on sample flooring strip when installing pre-finished floor- ing to make sure nailer does not dam- age finish. Replace base plate if it is damaged and marring flooring finish. Model T27338 (Mfd. Since 01/15)
  • Page 15 Note: Nailing/stapling depth is not always consistent due to variations in the flooring material. Sometimes it will be necessary to tap a few nails/staples flush with a hammer and a punch. Flooring Staple/Nail Side View Model T27338 (Mfd. Since 01/15) Tongue...

  • Page 16: Clearing Jammed Nails

    DO NOT use dirty or damaged 3. Place scrap wood under nose of nailer nails/staples! and strike head cap (see Figure 10) to ensure magazine is empty and make sure all compressed air is expended. Model T27338 (Mfd. Since 01/15)

  • Page 17: Section 5: Accessories

    To reduce this risk, only install accessories recom- mended for this tool by Grizzly. Refer to our website or latest catalog for additional recommended accessories. T20451—"Kirova" Clear Safety Glasses Figure 19.
  • Page 18 Great for all trim applications. Figure 24. T22325 Claw Bar. Figure 22. H6143 Finish Nailer. Model T27338 (Mfd. Since 01/15)

  • Page 19: Section 6: Maintenance

    Ignoring this warning may lubrication of your nailer will not be neces- lead to serious personal injury or sary. Just make sure there is always oil in even death! the lubricator. Model T27338 (Mfd. Since 01/15)

  • Page 20: Section 7: Service

    Figure 27. Bumper and washer. Items Needed Hex Wrench 3mm ........1 Hex Wrench 4mm ........1 Hex Wrench 5mm ........1 Piston Replacement Assembly ....1 Replacement O-Rings ......2 Snap-Ring Pliers ........1 Model T27338 (Mfd. Since 01/15)
  • Page 21 Figure 32. Piston and driver. 8. Remove snap ring and split ring from 12. Re-assemble nailer in reverse order. top of piston assembly (see Figure 30). Snap Ring Split Ring Figure 30. Split ring and snap ring location. Model T27338 (Mfd. Since 01/15)

  • Page 22: Troubleshooting

    2. Insufficient lubrication. (Page 17). Nail/staple drives 1. Too much air pressure. 1. Reduce air pressure. too deep. Nail/staple depth 1. Air line blocked/air pressure 1. Check for blockage/increase too shallow. too low. air pressure. Model T27338 (Mfd. Since 01/15)

  • Page 23: Section 8: Parts

    We do our best to stock replacement parts when possible, but we cannot guaran- tee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main 50 51 35 36 Model T27338 (Mfd. Since 01/15)

  • Page 24: Main Parts List

    PT27338034 CAP SCREW W/WASHER M5-.8 X 16 PT27338073 MODEL NUMBER LABEL, LEFT PT27338035 CAP SCREW W/WASHER M3-.5 X 12 PT27338074 WARNING LABEL PT27338036 ROLL PIN 3 X 12 PT27338075 TOUCH-UP PAINT, GRIZZLY GREEN PT27338037 DRIVER GUIDE PT27338076 PISTON ASSEMBLY REPAIR KIT Model T27338 (Mfd. Since 01/15)

  • Page 25: Warranty Card

    ____70+ How long have you been a woodworker/metalworker? ____0-2 Years ____2-8 Years ____8-20 Years ____20+ Years How many of your machines or tools are Grizzly? ____0-2 ____3-5 ____6-9 ____10+ Do you think your machine represents a good value? ____Yes ____No...
  • Page 26 Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE...

  • Page 27: Warranty

    WARRANTY Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents