Quick user guide for:
Ingenico iWL250 3G
Ingenico iWL250 WIFI
Ingenico ICT220+IPP320
Purchase
1. Pressing the green button
2. The <F> button opens the main menu.
3. Pressing <1> opens the transaction menu.
4. Push the <1> button. "Purchase" is activated.
5. Enter the amount and confirm with
When you press 1, the amount is 1 EURO.
Amounts less than "1" have to be preceded by the decimal mark, comma via the "." key.
6. Depending on the card type, it must be inserted in the chip card reader, held up to the
contactless reader, swipped through the magnetic swipe reader or entered manually after
pressing F4 for PAN key entry.
7. The amount is displayed for the customer to read. When using a card with an associated
PIN, the customer is instructed to enter the PIN code (4 to 6 digits) and confirm
with
. When using a card without a PIN, only the amount must be confirmed.
Generally, customers do not need to do anything further for a contactless payment of a
small amount. The transaction can be interrupted by pressing
Timeout: If a transaction is not concluded within 30 seconds, the process is aborted.
8. Payments are processed and, when appropriate, authorised online.
Chip cards: The card must remain inserted in the chip reader during the transaction
until the instructions appear to remove the card.
9. Receipt is printed out. Please follow the terminal's instructions: If the customer's
signature is necessary, please request and check the customer's signature.
10. To print a copy of the receipt: Push the <1> button.
To not print a copy of the receipt: Push the <2> button.
If no button is pushed, a copy is automatically printed after 30 seconds.
switches the terminal on.
.
1: Transactions
1: Purchase
<Amount>
<PIN>
.
1: Copy
or
2: No copy