Table of Contents
Advertisement
AXIS Q3505-SVE Mk II Network Camera
The product can be used with most operating systems and browsers. We recommend the following
browsers:
•
Internet Explorer
®
•
Safari
with OS X
TM
•
Chrome
or Firefox
For more information about using the product, see the User Manual available at www.axis.com
Set focus and zoom
These instructions are valid if you have selected Optical zoom for installation during camera
startup.
1. Go to Setup > Video & Audio.
2. On the focus page go to the Basic tab.
3. Set the zoom level using the slider.
Note
Movements in front of the camera should be avoided when performing autofocus.
4. Click Perform autofocus.
5. If the result is not satisfactory, go to the Advanced tab.
On the Advanced tab, focus can be adjusted manually:
1. Click Open iris to open the iris to its maximum position. This gives the smallest depth of
field and provides the best conditions for focusing.
2. Focus is set in the Focus window. Use the mouse to move and resize the focus window.
3. Click in the Focus position bar to focus on a desired location.
4. When satisfied, click Enable iris to enable the iris.
Set focus and zoom limits
These instructions are valid if you have selected Optical zoom for monitoring during camera
startup.
To set focus and zoom for a new preset position:
1. Go to PTZ > Preset Positions and set the focus and zoom for your preferred area in
the camera image.
2. Enter a name for your preset position in the Current position field and select Use
current position as Home.
3. Click Add to add your current position as a preset position.
4. Select your preset position in the Available positions drop-down list.
®
®
with Windows
®
®
with other operating systems.
20
Advertisement
Table of Contents
