AXIS Q3505–VE Fixed Dome Network Camera Installation Guide...
Page 2
Low Voltage (LVD) Directive 2006/95/EC. See Safety Every care has been taken in the preparation of this on page 3 . document. Please inform your local Axis office of any • Restrictions of Hazardous Substances (RoHS) Directive inaccuracies or omissions. Axis Communications AB cannot 2011/65/EU.
Page 3
FAQ database. この装置は、クラスB 情報技術装置です。この装置 Search by product, category, or phrase は、家庭環境で使用することを目 的としています • report problems to Axis support staff by logging in to が、この装置がラジオやテレビジョン受信機に近 your private support area 接して使用されると、 受信障害を引き起こすこと • chat with Axis support staff (selected countries only) があります。...
AXIS Q3505–VE Fixed Dome Network Camera Safety Information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report.
AXIS Q3505–VE Fixed Dome Network Camera Dome Cover NO TICE TICE TICE • Be careful not to scratch, damage or leave fingerprints on the dome cover because this could decrease image quality. If possible, keep the protective plastic on the dome cover until the installation is complete.
AXIS Q3505–VE Fixed Dome Network Camera Installation Guide This Installation Guide provides instructions for installing AXIS Q3505–VE Fixed Dome Network Camera on your network. For other aspects of using the product, see the User Manual available at www.axis.com Installation Steps 1.
AXIS Q3505–VE Fixed Dome Network Camera Hardware Overview Note 3–9 mm lens: Pressing the lens too hard while cleaning may cause the lens to move down. If this happens while the camera is in operation, re-calibrate the optics by clicking Calibrate from the Server Maintenance web page (System Options >...
AXIS Q3505–VE Fixed Dome Network Camera 16. Weather shield 17. Status Led 18. Function button 19. Spring 20. Heater Caution! Caution! The heater may be hot Caution! LED Indicators Color Indication Status Unlit Connection and normal operation Amber Steady during startup. Flashes during firmware upgrade.
Page 12
When a signal is received the state changes and the input becomes active (shown under System Options > Ports & Devices). Audio Connector The Axis product has the following audio connectors: • Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio connector - See Connectors on page 14 I/O connector - See Connectors on page 14 Power connector - Connector for AC and DC power for connection to the AXIS T8051 Power Converter AC/DC to DC (not included) wires. Wires...
Page 14
AXIS Q3505–VE Fixed Dome Network Camera Connectors I/O Connector 4–pin terminal block for: • Auxiliary power (DC output) • Digital Input • Digital Output • 0 V DC (-) Function Notes Specifications 0 V DC 0 V DC (-) DC output Can be used to power auxiliary equipment.
Page 15
AXIS Q3505–VE Fixed Dome Network Camera 12 V max 50 mA I/O configured as input I/O configured as output Audio Connector 3.5 mm audio connectors (stereo) 1 Tip 2 Ring 3 Sleeve Audio Balanced Microphone Ground Microphone/Line in Input Cold (-) In...
(see Attach Mounting Bracket to Wall on page 17). Use an appropriate conduit adaptor as required (see www.axis.com for optional accessories). See Hardware Overview on page 10. Mounting Bracket The mounting bracket has 4 mounting patterns.
AXIS Q3505–VE Fixed Dome Network Camera • : 4" octagon box • : standard-sized US single gang junction box Attach Mounting Bracket to Wall 1. Attach the mounting bracket (see Mounting Bracket on page 16) to the wall with appropriate screws.
AXIS Q3505–VE Fixed Dome Network Camera 3. Tighten the 4 tamper proof screws to attach the unit casing to the mounting bracket using the Resitorx key TR20. 4. Connect the cable to the camera unit. 5. Pull the springs aside in the unit casing and attach camera unit to the unit casing.
AXIS Q3505–VE Fixed Dome Network Camera 2. Slip the grooves in the black shield, over the screws on either side of the camera’s optic holder. Align the screws in the dome cover with the holes in the unit casing and tighten using the Resitorx key TR20.
AXIS Q3505–VE Fixed Dome Network Camera 3. Click Perform auto focus to focus the camera automatically. 4. If more adjustments are needed, go to the Advanced tab. Note • Movements in front of the camera should be avoided during automatic focusing.
Further Information The User Manual is available at www.axis.com Visit www.axis.com/techsup to check if there is updated firmware available for your network product. To see the currently installed firmware version, go to Setup > About. Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides.