Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Axis Q3505-SVE Mk II
Summary of Contents for Axis Q3505-SVE Mk II
- Page 1 AXIS Q3505-SVE Mk II Network Camera Installation Guide...
- Page 2 Low Voltage (LVD) Directive 2014/35/EU. See Safety Every care has been taken in the preparation of this on page 3 . document. Please inform your local Axis office of any • Restrictions of Hazardous Substances (RoHS) Directive inaccuracies or omissions. Axis Communications AB cannot 2011/65/EU.
- Page 3 FAQ database. Japan Search by product, category, or phrase この装置は、クラスA 情報技術装置です。この装 • report problems to Axis support staff by logging in to 置を家庭環境で使⽤すると電波妨害 を引き起こす your private support area ことがあります。この場合には使⽤者が適切な対 • chat with Axis support staff 策を講ずるよう要求され...
-
Page 5: Hazard Levels
AXIS Q3505-SVE Mk II Network Camera Safety Information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. -
Page 6: Safety Instructions
Battery The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. -
Page 7: Dome Cover
WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according to local regulations or the battery manufacturer's instructions. -
Page 9: Package Contents
AXIS Q3505-SVE Mk II Network Camera Installation Guide This Installation Guide provides instructions for installing AXIS Q3505-SVE Mk II Network Camera on your network. For other aspects of using the product, see the User Manual available at www.axis.com Package Contents For optional accessories see axis.com... -
Page 10: Hardware Overview
AXIS Q3505-SVE Mk II Network Camera • AXIS Q3505-SVE Mk II Smoked Dome • Multi-connector cable for connection of I/O and audio For information about available accessories, see www.axis.com Hardware Overview For specifications of the hardware components, see Technical Specifications on page 14. -
Page 11: Led Indicators
AXIS Q3505-SVE Mk II Network Camera Network connector Control button I/O connector Audio in connector Audio out connector SD card slot Status LED Function button Not used LED Indicators Note • The Status LED can be configured to flash while an event is active. - Page 12 SD card. Use your fingers to insert and remove the card. • Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or unmount the SD card from the Axis product’s webpages before removal.
- Page 13 (shown under System Options > Ports & Devices). Audio Connector The Axis product has the following audio connectors: • Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal.
-
Page 14: Technical Specifications
Multicable (sold separately) The multicable can be purchased from an Axis reseller for connecting external equipment to the Axis product. The cable provides the following connectors:... - Page 15 AXIS Q3505-SVE Mk II Network Camera Product AXIS Q3505-SVE Mk II Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1, Class 3, max. 11.4 W Connectors Audio Connector 3.5 mm audio connectors (stereo) 1 Tip 2 Ring 3 Sleeve Audio Input Balanced: ‘Hot’...
-
Page 16: Connection Diagrams
AXIS Q3505-SVE Mk II Network Camera Connection Diagrams I/O Connector 0 V DC (-) DC output 12 V, max 50 mA I/O configured as input I/O configured as output Install the Hardware Mounting bracket The mounting bracket has eight holes along the edge that should be used for fastening the bracket to a wall. - Page 17 AXIS Q3505-SVE Mk II Network Camera Depending on whether you want to use a junction box, or route the cables through or along the wall, follow the relevant instructions below. To mount the camera on a junction box: 1. Attach the adhesive gasket to the back of the mounting bracket.
- Page 18 AXIS Q3505-SVE Mk II Network Camera NO TICE TICE TICE Not pulling the cable back could cause water to seep in and damage the product. 4. If using a multicable, remove the other cable gasket from the unit casing and discard it.
-
Page 19: Adjust The Camera Angle
4. Remove the protective film from the dome cover. Access the Product AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products on the network and assigning them IP addresses in Windows®. Both applications are free and can... -
Page 20: Set Focus And Zoom
Chrome or Firefox with other operating systems. For more information about using the product, see the User Manual available at www.axis.com Set focus and zoom These instructions are valid if you have selected Optical zoom for installation during camera startup. -
Page 21: Reset To Factory Default Settings
AXIS Q3505-SVE Mk II Network Camera 5. Click Go to to set the camera in your preset position. 6. Click Save. To set limits for focus and zoom: 1. Go to Video & Audio > Focus & Zoom. 2. Select a value in the drop-down list for Zoom limit to limit the camera’s maximum zoom area. -
Page 22: Further Information
The user manual is available at www.axis.com • To check if there is updated firmware available for your product, see www.axis.com/support • For useful online trainings and webinars, see www.axis.com/academy Warranty Information For information about Axis’ product warranty and thereto related information, see www.axis.com/warranty/... - Page 24 Installation Guide Ver. M3.8 AXIS Q3505-SVE Mk II Network Camera Date: September 2016 © Axis Communications AB, 2016 Part No. 1585036...