Scanning Z-Folded Originals - Konica Minolta bizhub C652 Manual

bizhub C652/C552/C452/C360/C280/C220

Scanning Z-Folded Originals

Parameter Description
Mixed Original Select this setting when documents of different sizes are loaded into the ADF (optional).
The scan speed is decreased since the size of each page is detected before it is scanned.
Z-Folded Original Select this setting to detect the size of a zigzag-folded document by the length fed through the ADF.
Long Original Select this setting for documents that are longer than the standard size.
Original Direction Select the orientation of the document. After the document is scanned, the data is processed
so that it is correctly oriented.
Binding Position Select the binding position, such as when holes are punched in the document or the document is stapled.
This adjusts the scan of double-sided documents so that the binding position is not reversed.
Left Select this setting for a document with binding on the left side.
Top Select this setting for a document with binding at the top.
Auto: The binding is on the long side if the page is 297 mm or less, or it is on the short side
if the page is more than 297 mm.
Despeckle Select this setting to reduce the effect that dust on the left partition glass has on images
when the document is loaded into the ADF.
FUNCTION
This can be used in both the Fax/Scan mode or Copy mode
1 . Press Fax/Scan or Copy .
2 . Touch Original Setting .
3 . Touch Z-Folded Original .
Scan Job Shops
55