Selecting The Gamma Position; Switching The Iris Setting; Lamp Setting; Using The Advanced - Sharp XV-Z20000 Operation Manual

Selecting the Gamma Position

This function allows you to select the desired gamma
position.
See page 40 for details.
Note
• Gamma can be adjusted in greater detail with
"Gamma" on the menu screen.

Switching the Iris Setting

This function controls the quantity of the projected light
and the contrast of the image.
Selectable items
High Brightness High brightness is given priority over
high contrast.
Medium Mode Intermediate mode between high con-
trast and high brightness.
High Contrast High contrast is given priority over high
brightness.
Note
• You can also use IRIS on the remote control
to change the Iris. (See page 29.)

Lamp Setting

Select- Bright- Fan
able items ness sound
Bright 100% Normal
Eco + Approx. Low
Quiet 80%
Note
• When "Lamp Setting" is set to "Eco+Quiet", the
power consumption will decrease and the lamp
life will extend. (Projection brightness decreases
approximately 20%.)
Description
Power
consumption
Lamp Life
(When using
AC 100V)
320W Approx.
2,000
hours
265W Approx.
3,000
hours

Using the Advanced

"Advanced" allows you to make even fi ner adjustments
to the image so that it appears just the way you want
it to.
To display the Advanced menu, select "Advanced" and
press ENTER.
Note
• When the "Advanced" settings are displayed,
select "Advanced" again and press
to return to the "Picture" menu.

Adjusting the Colors

Select "C.M.S." (Color Management System) in the
"Advanced" menu and then press
This function adjusts each of the six main colors that
comprise the color wheel, altering their "Hue", "Satura-
tion", or "Value".
Selectable items
C.M.S.-Hue Sets the hue of the main colors.
C.M.S.-Saturation Sets the Saturation of the main colors
C.M.S.-Value Sets the Value of the main colors.
Reset The adjustments of "Hue", "Saturation"
and "Value" of all colors are reset to the
default setting.
Adjusting "Hue", "Saturation", or "Value".
Press or to select either "Hue", "Saturation", or
"Value" and then press
Select the color to be adjusted with
adjust it with or .
• When you press ENTER, the adjustment bar for the
selected system color will be displayed at the bottom
of the screen. Use this bar to make adjustments while
viewing the effects on-screen.
Example of adjusting the "Hue"
Main colors
button
Red Closer to magenta
Yellow Closer to red
Green Closer to yellow
Cyan Closer to green
Blue Closer to cyan
Magenta Closer to blue
• When "Saturation" is selected, the selected color
becomes lighter ( ) or thicker ( ).
• When "Value" is selected, the selected color be-
comes darker ( ) or brighter ( ).
• To reset the adjustment values of each color to the
default settings, select "Yes" in "Reset" and press
ENTER.
Menu operation ⇒ Page 34
ENTER
ENTER.
Description
ENTER.
or and
button
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red
-37