Cockpit Sunshade (Optional) - Quicksilver 810 Arvor Owner's Manual

Quicksilver 810 Arvor — System & Component Overview and Operation

23. Cockpit Sunshade (optional)

If installed, an optional cockpit sunshade is available to provide protection from the sun. The cockpit
sunshade consists of a rail on the hardtop and a canvas.
Operation
To extend the sunshade, simply push the pins on the back of the hardtop rails and slide the sunshade
rail out. The pins will re-engage and lock the rail when fully extended. To install the sunshade canvas,
slide the welting (piping) located on front edge of the sunshade through the sunshade track installed
on the hardtop. Next connect the sunshade to the sunshade rail using the zippers on the edge of the
sunshade. Finally, connect the sunshade straps to the eyelets on the deck.
Cockpit Sunshade
In rough seas, the sunshade should be stored to avoid
damage to the rail and or canvas.
33
Sunshade rail
Pull pin (P&S)
Sunshade canvas
Sunshade strap (P&S)
Deck eyelets