Fitting The Tilt Lock; Fitting The Machine Cover - Pfaff 3834-14/11 Instruction Manual

Mounting and commissioning the machine
8

Fitting the tilt lock

.01.02
3
8

Fitting the machine cover

.01.03
8 - 2
1
4
2
Fig. 8 - 02
4
4
3
Fig. 8 - 03
● Attach the tilt lock 1 and 2 from the
accessories with screws 3 and 4.
● Slide the slots of the lower section of the
cover 1 behind the heads of screws 2
and attach with screws 3, then tighten
4
screws 2 through the holes.
● Attach right and left cover sections with
screws 4.
2
1
Switch off the machine!
Danger of injury if the machine
is the machine is started
accidentally!
Do not operate the machine
without tilt lock 1. Danger of
crushing between sewing head
and table top!