Example Of A Seam Program Input Using The "Teach In" Function - Pfaff 3834-14/11 Instruction Manual

Input
11

Example of a seam program input using the "Teach in" function

.02.02
The seam program to be created should
-
-
-
-
-
● Switch on the machine.
● Select the program number "5", see Chapter 9.07 Selecting a program number.
● Call up the input mode.
● Call up the "Teach in" function.
● Set the basic size "50".
● Set the feed stroke "2.4" as the basic stitch length for the feed wheel.
2.4
● Set the seam type (right and left sleeve seam, beginning with right) by pressing the
● Call up the menu for comment input.
● Enter the comment with the keyboard and number panel.
● Conclude comment input.
● Change to input of the first seam section.
11 - 10
consist of a right and a left sleeve seam (beginning with the right)
contain 2 seam sections
be based on a basic size 50 (German men's size)
have a basic stitch length of 2.4 mm
be stored under the program number "5" with the comment "LEARN".
5
appropriate symbol several times until the corresponding seam type appears.
LERNEN
1 1
2.4