Sewing; Manual Sewing - Pfaff 3834-14/11 Instruction Manual

10

Sewing

In the sewing mode all relevant settings for the sewing operation are displayed on the
screen and can be altered with the corresponding functions.
In the sewing mode a difference is made between manual sewing, sewing with fixed
programs and programmed sewing.
The selection is made with the corresponding program number:
1 and 2:
3 to 49:
10

Manual sewing

.01
In the manual sewing mode the values for the feed strokes (stitch lengths) of the bottom
feed (feed wheel) and the top feed (roller presser), the start and end backtacks, the stitch
placement position when starting sewing, the thread tension and the needle and sewing foot
positions are shown on the display and can be changed directly. Fullness can be controlled
with the stitch length input on the control panel or with the aid of the left pedal. If the
fullness is selected with the left pedal, the current fullness value is displayed as a bar display
below the stitch length display.
● Switch on the machine and select program number "0", see Chapter 9.07 Selecting the
program number.
Explanation of the functions
Program selection
This opens the menu for entering the program number, see Chapter 9.07 Selecting the pro-
gram number.
Input mode
Exit the sewing mode and select the input mode.
Stitch lengths
This opens the menu for entering the feed strokes of roller presser and feed wheel, see
Chapter 9.08 Adjusting the stitch lengths.
0: Manual sewing
Sewing with fixed programs
Programmed sewing
(with up to 15 seam sections for both the left and right seam)
2.5
50
2.5
Sewing
10 - 1