Installing The Driver; Driver Installation - ATEN UN-161 User Manual

Driver Installation

PC / Windows Installation

Installing the Driver

1. With your computer booted up, plug the cable
into the computer's USB port. When the New
Hardware Wizard appears; click on Next to
continue.
2. In the dialog box that comes up choose
Search for the best drivers for your device;
Click on Next to continue.
3. In the dialog box that comes up, choose
Specify a Location; put the distribution CD-
ROM disk into the CD-ROM drive, then click
on Browse; select the CD-ROM folder; select
the folder that corresponds to your Windows
version (Win 95, Win 98, or Win 2000);Click on
OK to return to the dialog box; Click on Next.
4. The next dialog informs you that the driver
has been found; Click on Next to continue.
The driver file is now copied to your hard disk.
5. After the driver file has been copied to the
hard disk, a dialog box appears to tell you that
the installation has finished. Click on Finish.
Windows now finishes up the installation.
2