Pairing The Headset - Sennheiser MB 660 Instruction Manual

Getting started
14 | MB 660

Pairing the headset

CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the
operation of sensitive and unprotected devices.
Only make calls with the headset in locations where Bluetooth is
X
permitted.
To pair your headset with a Bluetooth device, you can use NFC or the Bluetooth
search function. In order that a connection between the headset and a Bluetooth
device can be established, Bluetooth must be activated on both your headset
and the device.
The MB 660 Wireless headset complies with the Bluetooth 4.2 standard. In order
that data can be transmitted wirelessly using Bluetooth, you have to pair your
headset with a compatible Bluetooth device that supports the following profiles:
• Hands Free Profile (HFP)
• Headset Profile (HSP)
• Audio/Video Remote Control Profile (AVRCP)
• Advanced Audio Distribution Profile (A2DP)
• Device ID Profile (DIP)
When you switch the headset on for the first time, it automatically enters
the pairing mode. If the headset has already been paired with a few devices,
it automatically tries to connect to the last two connected Bluetooth devices
when switched on. The headset can save the connection profiles of up to eight
Bluetooth devices with which it have been paired.
If you pair the headset with the ninth Bluetooth device, the saved connection
profile of the least used Bluetooth device will be overwritten. If you want to re-
establish a connection with the overwritten Bluetooth device, you have to pair
that device back with the headset.
You can instantly pair the headset with your device if the device supports NFC.
Using the headset with a PC and a Bluetooth USB dongle
To use the headset with a softphone, you either require a PC supporting
Bluetooth or an additional Bluetooth USB dongle (wireless audio transmitter
and receiver).
The BTD 800 USB or BTD 800 USB ML Bluetooth dongle is supplied together with
the MB 660 UC or MB 660 UC MS variants and is pre-paired with the headset.
To use the headset with a Bluetooth USB dongle:
Plug the Bluetooth dongle into the USB port of your PC.
X
Follow the instructions in the next chapter, as well as those given in the
X
instruction manual of your Bluetooth dongle.
paired +
connected
paired