Adjusting The Volume - Sennheiser MB 660 Instruction Manual

Using the MB 660

Adjusting the volume

WARNING
Danger due to high volume levels!
Listening at high volume levels for long periods of time can lead to
permanent hearing defects. Switching between audio sources may
cause enormous volume jumps that can permanently damage your
hearing.
Before putting the headset on and before switching between
X
audio sources, adjust the volume to a low level.
Do not continuously expose yourself to high volume levels.
X
You can adjust the volume for music, voice prompts, tones, and phone calls.
If you are playing music or are on a call:
Swipe vertically up or down on the touch pad to increase or decrease the
X
volume for music or calls.
If you are in idle mode, i.e. if you are not playing music/making calls:
Swipe vertically up or down on the touch pad to increase or decrease the
X
volume for voice prompts and tones.
Gesture Function
Depending on the length of the swipe, you can adjust the volume in smaller
increments by doing a short swipe on the touch pad. To adjust the volume in
larger increments, do a longer swipe on the touch pad. When the maximum
or minimum volume is reached, you hear the voice prompt "volume max" or
"volume min" accordingly.
When switching the headset off, very high volume levels are reset to a moderate
level to protect your hearing when you switch the headset back on.
Increases the volume
Decreases the volume
MB 660 | 19