Sennheiser MB 660 Instruction Manual page 17

Getting started
16 | MB 660
Pairing the headset with a Bluetooth device
Ensure that the headset is within the 20 cm range of your smartphone and that
Bluetooth is activated on the headset when performing this procedure.
1. Switch the headset on (see page 18).
If the headset doesn't automatically enter pairing mode, press the Sound
Effect Mode button for 4 seconds or until you hear tones and the voice
prompt "pairing".
The LEDs flash white in sequence. The headset is in pairing mode.
Activate Bluetooth on your smartphone.
2.
3. On your smartphone, start a search for Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone are
displayed.
4. From the list of found Bluetooth devices, select "MB 660". If necessary, enter
the default PIN code "0000".
You hear the voice prompts "pairing successful" and "phone x connected".
The LED flashes white 3 times.
› power on ‹
› pairing ‹
20 cm
Menu
Add device
› connected ‹
If no connection could be established within 5 minutes, pairing mode is
terminated and you hear the voice prompt "no device found". Restart the
headset by switching it off and on again, and repeat the pairing procedure.
Menu
Bluetooth on
Bluetooth off
MB 660
MB 660
Keyword: 0000
3X