Table of Contents
Advertisement
Troubleshooting
Leaving the Bluetooth transmission range
Wireless calling and streaming are only possible within the Bluetooth
transmission range of your smartphone. The transmission range largely depends
on environmental conditions such as wall thickness, wall composition etc. With
a free line of sight, the transmission range of most smartphones and Bluetooth
devices is up to 25 meters.
If the headset leaves the Bluetooth transmission range of the smartphone, the
sound quality deteriorates until you hear the voice prompt "lost connection...
phone x disconnected". At this point, the connection breaks down completely. If
you immediately return to the Bluetooth transmission range, the connection is
automatically re-established and you hear the voice prompt "connected".
Resetting the headset
If the headset is not functioning properly, reset the headset.
1.
Switch the headset off. See page 18.
2.
Press the Sound Effect Mode button for 4 seconds.
You can restore the headset to its factory default settings using CapTune.
Clearing previously paired devices
Ensure that Bluetooth is activated on the headset when performing this
procedure.
1.
Restart the headset by switching it off and on again (see page 18 ).
2.
Press the Sound Effect Mode button for 4 seconds.
You hear tones and the voice prompts "phone x disconnected" and "pairing"
and the LEDs flash white in sequence.
3.
Press the Sound Effect Mode button again for 4 seconds until you hear tones
and the voice prompt "pairing list cleared".
The LEDs flash white in sequence. The headset is permanently disconnected
from all devices and enters pairing mode.
› power off ‹
› power on ‹
Effect Mode Control
Effect Mode Control
4s
› pairing list cleared ‹
4s
MB 660
| 33
Hide quick links:
Advertisement
Table of Contents
