No Read; Video Reverse - Honeywell ORBIT 7120PLUS User Manual

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using
an EZConfig Cloud for Scanning Tool Scan Data Window (see
appears when a code cannot be read. If No Read is turned Off, the "NR" will not
appear. Default = Off.
If you want a different notation than "NR," for example, "Error," or "Bad Code," you
can edit the output message (see
code for the No Read symbol is 9C.

Video Reverse

Note: This feature is not supported by the Orbit 7120plus scanner.
Video Reverse is used to allow the scanner to read bar codes that are inverted. The
Video Reverse Off bar code below is an example of this type of bar code. Scan
Video Reverse Only to read only inverted bar codes. Scan Video Reverse and
Standard Bar Codes to read both types of codes.
Note: After scanning Video Reverse Only, menu bar codes cannot be read. You must scan
Video Reverse Off or Video Reverse and Standard Bar Codes in order to read menu
bar codes.
Note: Images downloaded from the unit are not reversed. This is a setting for decoding only.
Orbit 7120plus/7190g User Guide
On
Video Reverse Only
Data Format beginning on page 65). The hex
page 171), an "NR"
* Off
Video Reverse and Standard
Bar Codes
57