Connect the Device
Connect with USB
The scanner can be connected to the USB port of a computer.
The unit defaults to a USB PC Keyboard. Refer to
settings.
For additional USB programming and technical information, refer to "USB Applica-
tion Note," available at
Connect with Keyboard Wedge
The scanner can be connected between the keyboard and PC as a "keyboard
wedge," where the scanner provides data output that is similar to keyboard entries.
The following is an example of a keyboard wedge connection:
2
a. Connect the appropriate interface cable to the scanner first, then to the USB
port on the computer.
b. The scanner beeps.
c. Verify the scanner operation by scanning a bar code from the
Symbols
on page 223.
www.honeywellaidc.com.
page 10
for other USB terminal
Orbit 7120plus/7190g User Guide
Sample