Control Character Output; Keyboard Modifiers - Honeywell ORBIT 7120PLUS User Manual

These settings override
Note: If your interface is a keyboard wedge, first scan the menu code for
Lock
Default = Keyboard Conversion Off.

Control Character Output

This selection sends a text string instead of a control character. For example, when
the control character for a carriage return is expected, the output would display
[CR] instead of the ASCII code of 0D. Refer to
1252)
the chart). Default = Off.
Note: Control + X (Control + ASCII) Mode overrides this mode.
Control Character Output On

Keyboard Modifiers

This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Orbit 7120plus/7190g User Guide
(page 24). Otherwise, your output may not be as expected.
* Keyboard Conversion Off
Convert All Characters
to Lower Case
on page 214. Only codes 00 through 1F are converted (the first column of
Keyboard Style selections.
Convert All Characters
ASCII Conversion Chart (Code Page
* Control Character Output Off
Automatic Caps
to Upper Case
25