Advertisement
Getting to know your machine
Handle
Clean water/solution
tank release button
Clean water tank cap
Wash/Rinse dial
Dirty water tank
release latch
Dirty water tank
Accessory hose
connector cover
Nozzle release clip
SpinScrub brushes
and brushbar
Technical Specification
Name Dual Power Pro
Clean water tank 3.5L
Code VX65
Dirty water tank 2L
Voltage 220-240V~50Hz
Cord length 8m
Wattage 1200W
Weight 11kg
Subject to technical change without notice.
Trigger (hidden)
Solution tank cap
Quick cord
release hook
Handle lock dial
Hose connector
port (hidden)
Nozzle
Recline pedal
Hard
floor tool
Accessories & Consumables
CCSOL125 Vax Carpet Cleaning Solution 1.25L
*
To purchase consumables and accessories, please visit
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing. Test for colourfastness - Wet a white
absorbent cloth with the solution. In a small hidden area of your carpet/rugs/upholstery gently rub with the dampened cloth.
Wait ten minutes and check for colour removal or bleed with a white paper towel or cloth. If your carpet has more than one
colour, check all colours. Test your carpet/rugs/upholstery – Run the carpet washer over a small hidden area.
If no pile distortion occurs continue cleaning. When cleaning an entire room, move furniture out of the area to be cleaned.
If the furniture cannot be moved, place aluminium foil or wax paper under the legs. This will prevent wood finishes from
staining your carpet. Pin up furniture skirts and curtains. When using the carpet washer, basic safety precautions should
always be observed and don't over saturate your carpets. Only use Vax carpet solution. Using other solutions may cause
excess foaming and will invalidate your warranty. The clean water tank should only be filled with warm water (max 40'C).
Never use boiling water as you may damage your machine and invalidate the warranty. This is a powerful carpet washer,
before plugging in make sure all controls are turned off also hold carpet washer firmly when starting and during use.
Assembling your vacuum cleaner
On/Off
pedal
Stand the base of carpet washer on
the floor in the upright position.
vax.com.au
Getting started
Turn handle lock dial clockwise
Tilt clean water/solution tank and
to lock in position until it clicks
line up onto carpet washer.
into position.
Push tank back until it clicks
into place.
Advertisement
