Download Print this page

Vax VX65 Let's Get Started page 7

Advertisement

Using your machine
CAUTION: To prevent damage to wood floors and other hard floors, follow the flooring manufacturer's
cleaning recommendations. Inspect floor surface for worn finish, bare wood or separated joints.
If it's not recommended to use the carpet washer on floors if any of these conditions exist.
IMPORTANT: Before attaching the hard floor squeegee onto carpet washer, remove tanks or make sure tanks are empty
before lying the carpet washer on its back.
Washing hard floors
Lie carpet washer on its back, line
Hook front of squeegee onto edge
up squeegee with nozzle.
of nozzle.
CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
Emptying the dirty water tank
Press dirty water tank
Push down dirty water
release latch, pull to
tank clip to release lid.
remove dirty water tank.
Lift to remove dirty water
tank lid.
Clean the filter screen
To re-fit, tilt dirty water tank and line
located at the back of the
up onto carpet washer. Push back
dirty water tank.
until it clicks into place.
Push squeegee under nozzle until it
clicks into place.
Empty dirty water over
the sink. Rinse dirty water
tank and lid under water
to remove dirt/debris.
Taking care of your machine
Removing and cleaning the nozzle
Remove both tanks and tilt
Lift nozzle release clip
carpet washer back.
and pull nozzle forward,
separating tabs on nozzle
and carpet washer.
Removing blockages from brushbar and SpinScrub brushes
Using a pair of scissors
Using a crosshead
remove any threads or
screwdriver remove the
hair caught around
bottom screws from each
the brushbar.
of the rug guards (metal
pins) so the bottom of the
pin is released. Unclip the
top of each to release
Rinse nozzle under water
Replace nozzle by lining
to remove dirt/debris.
up tabs on nozzle with
tabs underneath front
of carpet washer. Push
nozzle down until it clicks
into place.
Firmly pull sides
Remove any threads or
of SpinScrub cover
hair caught around the
to remove.
brushes, rinse under
water to remove debris.

Advertisement

loading