Download Print this page

Vax VX65 Let's Get Started page 8

Advertisement

Let's talk technical
CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
Changing the brushbar
Lie carpet washer on its
Using a crosshead
back exposing SpinScrub
screwdriver remove the
bottom screws from each
brushes and brushbar.
of the rug guards (metal
pins) so the bottom of the
pin is released. Unclip the
top of each to release
Undo the four screws on the side brushes.
Pull and slide right side brushes together with brushbar.
Remove side cap from brushbar and unloop brushbar
from belt.
Firmly pull sides
Use a crosshead
of SpinScrub
screwdriver. Undo 2
cover and remove
screws and remove
SpinScrub brushes.
belt guard.
Pull and slide left side brushes and remove side cap
from brushbar.
Loop replacement brushbar through belt and onto
belt grip.
Changing the brushbar (continued)
Line up the 'right' side brushes with base and slide
into place. Attach brushbar to side brushes.
Refit belt guard and tighten x2 screws. Refit and tighten screws x2
on either side of side brushes. Refit SpinScrub brushes. Refit rug
guard pins and tighten screws.
Let's talk technical
Attach the other side of brushbar to side
brushes. Slide onto side of base and into place.

Advertisement

loading