Getting Started - Vax Zoom U87-ZM-B User Manual

PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Before plugging the cord into the electrical outlet, make sure the switch is in the 'off' position. Hold the vacuum cleaner
firmly when starting and in use.
Assembling your upright
Insert the backbone into
the floorhead.
Attach hose clip to the
air inlet tube.
Plug in and switch on
your machine.
vax.co.uk
Insert the cord holder into
the hole at the bottom of the
product backbone.
1. Place the dirt container
onto the product and
click in place to secure.
2. Store the extension tube
in to the handle then
Insert the handle at the
top of the product.

Getting Started

Now take the small clip and
push it down between the
end of the cord holder and
the machine, to lock the cord
holder in place.
Hose connector fits into the
air inlet tube bayonet.
1. Insert the short end of
the hose into the tube at
the back of the machine.
2. Wrap the hose around
the machine and
connect the hose end
to the floorhead.
1. Attach TurboTool clip to
the handle
2. Snap TurboTool into
position.
4