Page 1
20L Wet & Dry Vacuum Cleaner Get Cleaning... What ’ s your Vax ’ s model number? What ’ s your serial number? (Located on the top of the machine) Note these down in case you need them in future. Please keep instructions for further use.
If servicing of this product is required, it should only be performed by a qualified service agent. Please visit the Vax website for a Do not vacuum baking soda or any other powder-based carpet most up to date list of vax service agents.
Use bristles on the floor For soft surfaces such as the end of the hose and tool for hard surfaces. carpet, remove bristles by then the dual function floor pressing the 2 clips down. tool to the end of the wand. vax.com.au vax.co.nz...
Page 6
Connect the vacuum housing cover onto the cleaner to the power main tank and secure supply and switch ON into position with the by pushing the on/off two retaining clips. switch “I”. Vax Careline: AU: 1300 361 505 NZ: 0800 800 900...
Page 7
At this of the nozzle is not totally point turn off the machine immersed. and unplug it from the mains NOTE: Clean and dry the inside and outside of the power and empty the tank. machine before storage. vax.com.au vax.co.nz...
Page 8
“I”. of the machine. Remove floor tool and connect the crevice nozzle to hose. Vax Careline: AU: 1300 361 505 NZ: 0800 800 900...
Maintenance (Keep your Vax as good as new) Storage Before storing away, make sure to empty all contents of tank container. Make sure all parts, tank and filters are dry prior to storing machine. Installing and cleaning the DRY filter NOTE: Unplug machine from the power outlet before performing maintenance.
Page 10
Maintenance (Keep your Vax as good as new) Installing and cleaning the FOAM filter NOTE: Unplug machine from the power outlet before performing maintenance. Installing Foam Filter 1. Follow instructions to remove dry dust filter first before changing to foam filter.
Page 11
Check the suction nozzle, hose, and tank inlet for obstructions. Suction nozzle, hose, or tank inlet is blocked. we’re here to help For troubleshooting please call or visit our website: AU: 1300 361 505 vax.com.au NZ: 0800 800 900 vax.co.nz vax.com.au vax.co.nz...
8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Need help?
Do you have a question about the VX40 and is the answer not in the manual?
Questions and answers