Luxman L-550AXII Owner's Manual page 5

Round pattern board
After careful consideration of delicate audio signal flow, a
round pattern board has been applied to achieve smooth sig-
nal transmission.
Phono amplifier
This unit is equipped with a phono amplifier that is compat-
ible with the MM/MC cartridge to achieve analog record re-
production in a high-grade level without adding a dedicated
phono amplifier.
Separate function
This unit is equipped with a separate switch to separate the
pre-amplifier and power-amplifier each other that enables the
bi-amp connection adding a power-amplifier and the coexis-
tence with an AV system.
Loopless chassis structure
This unit consists of the independent construction of a
loopless chassis to eliminate increased ground impedance
caused by chassis current.
18 mm pitch RCA terminal
Introduction of 18 mm pitch all RCA input/output terminals
allows even a high-performance line cable with large plug to
be connected.
INTEGRATED AMPLIFIER L-550AX
Large type speaker terminals
Speaker terminals (A and B systems) of inline layout (with
same characteristics for right and left), which is compatible
with Y lugs to enable easy connection with extra-thick speak-
er cables.
Headphone output terminal
This terminal allows you to casually enjoy sound with head-
phones.
Needle-type meter
This unit is equipped with needle-type meters lighted with
LED, which improves the visibility in the listening room.
Aluminum remote control
The high-grade remote control, which is encased in alumi-
num, can control applicable CD/SACD players as well.
Ⅱ
3