Specifications - Luxman L-550AXII Owner's Manual

Specifications

Rated output
Total harmonic distortion
Pre-amplifier
Input sensitivity/input impedance
Main-amplifier
Input sensitivity/input impedance
Output voltage
S/N ratio
Frequency response
Tone control
Loudness control
Damping factor
Supplied functions
Accessories
Power supply
Power consumption
Max. external dimensions
Weight
* Specifications and appearance are subject to change without notice.
20 W+20 W (8 Ω)
40 W+40 W (4 Ω)
0.007 % (8 Ω, 1 kHz both channels simultaneous drive, line straight on)
0.02 % (8 Ω, 20 to 20 kHz both channels simultaneous drive, line straight on)
PHONO (MM)
PHONO (MC)
LINE
MONITOR
BAL. LINE
MAIN-IN
REC OUT
PRE-OUT
PHONO (MM)
PHONO (MC)
LINE
PHONO (MM)
PHONO (MC)
LINE
Max. amount of change
100 Hz
10 kHz
• Power meters
• Recording switch
• Monaural switch
• Tone control
• Phone jack
• Phase inverter
• Remote control RA-17A
• Owner's Manual
• Safety cautions
230V ∼ (50 Hz)
230 W
0.5 W (at standby), 170 W (at no input)
440 (W) x 178 (H) x 454 (D) mm
(front side knob with 20 mm and rear side terminal with 27 mm included in
depth)
24.3 kg (main unit only)
INTEGRATED AMPLIFIER L-550AX
: 2.5 mV / 47 kΩ
: 0.3 mV / 100 Ω
: 180 mV / 47 kΩ
: 180 mV / 47 kΩ
: 180 mV / 55 kΩ
: 450 mV / 47 kΩ
: 180 mV
: 1 V
: 91 dB or more
(IHF-A correction, 5 mV input)
: 75 dB or more
(IHF-A correction, 0.5 mV input)
: 105 dB or more
(IHF-A weighted, input shorted, line straight on)
: 20 Hz to 20,000 Hz (±0.5 dB, line straight on)
: 20 Hz to 20,000 Hz (±0.5 dB, line straight on)
: 20 Hz to 100,000 Hz (within –3 dB, line straight on)
BASS : ±8 dB at 100 Hz
TREBLE : ±8 dB at 10 kHz
: +7 dB
: +5 dB
: 200
• Balance
• Speaker selector (A, B)
• Subsonic
• Separate
• Line straight
• Loudness
• Power cable
• 2 pieces of "AAA" batteries
Ⅱ
21