NOTE:
The STATUS LED is normally green. A red STATUS LED indicates a
malfunction of the IDU.
5.5 Monitoring LED Status Indicators
Once the IDU is powered up with the appropriate Options file, check the LEDs to
ensure the IDU is functioning properly.
5.5.1 Front Panel Power and Network LED Status Indicators
For diagnostic purposes, the IDU chassis has five LED indicators located on the front
panel.
•
The PWR LED indicates whether the IDU is powered on or off.
•
The STATUS LED indicates the IDU overall status.
•
The NET LED indicates the IDU network acquisition status.
•
The Tx LED indicates the IDU transmitter status.
•
The Rx LED indicates the IDU receiver status.
iDirect 3000 series™ Satellite Router Installation and Safety Manual
Always connect or disconnect power to the IDU with the AC power
cord at the power supply unit. Never connect or disconnect power
to the IDU with the DC cord from the power supply unit while it is
being powered on; this action may result in damage the BUC, LNB,
and/or IDU.
43