Figure 9 Rear View of an iDirect 3000 series™ Satellite Router in a Rack Mount Tray
5
Place the External Power Supply on the Rack-Mount Tray. Be sure the IEC-320-C14
AC inlet of the External Power Supply faces the rear of the Rack-Mount Tray.
6
Connect the DC output cord of the External Power Supply to the IDU. The excess
DC cord can be coiled up and tucked between the External Power Supply and the
IDU. Use the supplied 17-inch wire ties to secure the External Power Supply to the
tray.
7
Mount the Rack Mount Tray into the 19-inch rack.
30
iDirect 3000 series™ Satellite Router Installation and Safety Manual