Connecting Ac Power To The Idu; Preparing Your Pc/Laptop For Connection To The Idu; Table 13 Ac Power Safety Warnings And Cautions - iDirect 3000 series Installation And Safety Manual

5.4 Connecting AC Power to the IDU

The IDU can be powered directly from the facility AC power source from 100 VAC to
240 VAC. iDirect recommends that the chassis be powered from a low noise, low
transient AC power source.
AC power.
Table 13 AC Power Safety Warnings and Cautions
Symbol

5.4.1 Preparing Your PC/Laptop for Connection to the IDU

See Section 5.2,
more information about the interface connectors.
Ensure that your PC/laptop:
• Is loaded with iDirect's iSite software
• Contains a Network Interface Card (NIC) connected with a crossover cable to the
10/100 LAN port of the IDU
• Is running console terminal software, such as HyperTerminal
iDirect 3000 series™ Satellite Router Installation and Safety Manual
Table 13 presents safety warnings and cautions related to
Warning type Definition
WARNING/CAUTION Improper AC power source rating,
excessive noise or transients, or undersized
circuit breaker will result in service
interruption.
DANGER Never disconnect the power to the IDU
using the DC output power cord of the
external power supply.
WARNING/CAUTION If you must remove power from the
chassis, you should disconnect power using
the AC power cord.
iDirect 3000 series™ Satellite Router Rear Interface Connectors for
41