4.5.2 Additional Components Normally Required
•
An iDirect Specified L-Band cable — Consists of a RG-6 or RG-11 dual-coax cable
and connectors (to connect the IDU and ODU), plus type F connectors and sealant
tape. (See
•
Non-Pen (Non-Penetrating) Roof Mount
•
Ballast (anchor weight)
NOTE:
For instructions on installing your antenna, refer to its manufacturer's
Installation Guide.
24
Chapter 5,
Installation.)
Figure 7 Typical Antenna with BUC and LNB
iDirect 3000 series™ Satellite Router Installation and Safety Manual