Media Player - Adastra RM244V User Manual

Media player

The RM244V is fitted with a built-in media player, which allows playback of music or audio messages
stored as standard compressed audio files on either USB pen drive or SD card.
The media player also has an FM radio tuner function and Bluetooth receiver as described below.
The output level of the media player is controlled by the MEDIA control (5) on the front panel.
Controls
SOURCE USB / SD / FM tuner / Bluetooth input source selector
 Previous track or FM channel / volume down
 Play or pause current track / auto tune FM stations
 Next track or FM channel / volume up
REPEAT Repeat mode – off, single track or all
MUTE Mute media player output
USB/SD
Push a USB pen drive into the USB port (12) and/or SD card into the SD card input (11) and the
audio files will start to play automatically. Turn up the MEDIA control gradually to hear the output
from the speakers and increase to the required level.
If play does not start automatically, press the SOURCE button and Play/Pause button () to check
if the player is set to play from the required memory device. If playback still does not start, try
pressing the Previous track and Next track buttons (, ). Otherwise, check that the audio files are
standard compressed type.
Normal playback will read through all tracks on the storage device. Pressing the REPEAT button (7)
will step through the repeat modes
ONE = repeat current track
RND = random play
ALL = repeat all tracks
Pressing the Previous track button () briefly steps backwards through tracks on the memory
device. Press and hold this button to decrease the playback volume.
Pressing the Next track button () briefly steps forwards through tracks on the memory device.
Press and hold this button to increase the playback volume.
To pause the current track, press the Play/Pause button () and press again to resume playback.
The LCD display will show the track number when a track is selected and then the elapsed time
when it is playing.
RM244V & CS4 User Manual