Table of Contents
Advertisement
Selecting AUX, LINE A or LINE B will play any line level signal connected through that input into the MUSIC
channel, governed by the MUSIC level control (7). Make sure the LINE input LEVEL controls (18) or AUX level
(2) is turned up part way for checking. This can be increased to the required level after the initial test.
Likewise, if MEDIA is selected, then playback from any of the selectable media player modes will be played
through the MUSIC channel. Please see below for further details of the media player operation.
In addition to channel and MASTER volume controls, there are BASS and TREBLE EQ controls (8, 9) to adjust
the tone of each amplifier output. At the 12 o'clock position, these controls are applying no effect to the signal
(no boost or cut).
Moving the BASS control clockwise boosts the low frequencies in the audio, whilst moving it anticlockwise will
cut these low frequencies. Likewise, moving the TREBLE control clockwise boosts the high frequencies in the
audio, whilst moving it anticlockwise will cut these high frequencies. Adjust these EQ controls to suit the type
of audio signal or compensate for the room acoustics.
Media player
V-series amplifiers are fitted with a built-in media player (1)
The media player has a Bluetooth receiver, USB/SD audio player and
a DAB+ or FM radio tuner. Pressing the SOURCE select button will
step through Bluetooth, SD, USB, DAB and FM tuner modes. Pressing
the MUTE button for any source will mute the output. Holding the
MUTE button powers down the media player and pressing it again
powers it up again.
Settings menu
The media player has a menu for global settings, which can be accessed by holding down the SOURCE button.
Press and to step through menu pages and to select an option. Press REPEAT / ... to go back.
Setting
Press
<Set Time/Date >
<Set 12/24 hour >
<Time
>
<Set date format>
<Auto update
<Timeout
<Backlight
>
<On level
<Language
>
<English> / <Deutsch> / <Italiano> / <Françes> / <Español> / <Português>
<Factory Reset>
<No> / <Yes> ("Yes" will reset and start a re-scan for DAB. Bluetooth will need to be re-paired)
<SW version >
Displays the current software version
Bluetooth
Search available Bluetooth devices on your smart phone or other sending device for a device with Bluetooth
ID "adastra-****" (where **** is a unique ID number for each unit). Select to pair and connect with this ID.
When paired and connected, set the volume low on the smart phone or other sending device and play a track
to check the sound through the speakers, increasing the volume on the smart phone to the required level.
Playback controls on the media player can remotely operate the smart phone from the amplifier front panel.
Pressing will pause or play the current track, or holding will disconnect the current paired device.
Pressing or will select the previous or next track. Holding or will decrease or increase the volume.
Pressing the REPEAT / ... button will switch the display to show the current time or date on the lower text line.
If there is no Bluetooth playback for 15 minutes, the display will revert to show the current time and date.
Press to step through settings and enter. Use / to adjust values
DD-MM-YYYY... HH:MM
<Set 24 hour> / <Set 12 hour>
<DD-MM-YYYY> / <MM-DD-YYYY>
>
<Update Any> / <No Update> / <Update from FM> / <Update from DAB>
>
< On / 10sec / 20sec / 30sec / 45sec / 60sec / 90sec / 120sec / 180sec >
>
<Low> / <Medium> / <High> (brightness)
953.251UK, 953.252UK User Manual
Advertisement
Table of Contents
