ICM Controls i3 2010WR Installation, Operation & Application Manual page 21

There are two ways to connect your thermostat to your wireless network using a computer with Wi-Fi: using the WPS button on
your wireless router or connecting with your wireless network. If you do not remember your wireless password, you can use the
WPS button to connect your thermostat to the network.
1. Reset Wi-Fi on thermostat. To reset Wi-Fi, please follow the steps under Wi-Fi Reset on Page 19.
2. Go to Network Settings in Control Panel and select the network named: ICM_I3_xxxxxxxxxxxx (x's indicate thermostat ID
You may also connect to the network by clicking on
3. In your internet browser, enter http://192.168.10.1/ in the address line.
Using Your Wireless Network:
a. In the list of available networks, select the correct network and enter password (if password protected).
b. ! will stop flashing and will display, indicating the thermostat is successfully connected to Wi-Fi.
Using the WPS Button:
a. On your wireless router, press the WPS button until the router indicates it is searching for a wireless device.
b. On your computer, scroll to the bottom of the page in the browser and select "Go!" under "Press the WPS button on your
Wi-Fi Access Point".
c. ! will stop flashing and will display, indicating the thermostat is successfully connected to Wi-Fi.
4. In your internet browser, enter http://www.captouchwifi.com in the address line.
5. Sign into your account.
6. Under "Add thermostat" enter the thermostat ID, found on a label affixed to the back of the thermostat and on the front of this
book.
7. Enter the thermostat name, zip code, and description.
Using a Computer with Wi-Fi
(Microsoft) or (Apple) and selecting the correct wireless network.
21