ICM Controls i3 2010WR Installation, Operation & Application Manual page 17

14. Minimum Cool Setpoint (45°F to 90°F) (7°C to 32°C)
Adjust to control the minimum cool set temperature allowed.
Press the or to select.
Press to advance to the next screen.
15. Vacation Cooling Setpoint
These work in conjunction with the Schedule mode where you set the date and time of your
RETURN from vacation (Page 28).
Until that date/time, system will remain at the cooling setpoint specified here.
Press the or to select.
Press to advance to the next screen.
16. Vacation Heating Setpoint
These work in conjunction with the Schedule mode where you set the date and time of your
RETURN from vacation (Page 28).
Until that date/time, system will remain at the heating setpoint specified here.
Press the or to select.
Press to advance to the next screen.
17. Room Temperature Offset (+9°F to -9°F) (+4.5°C to -4.5°C)
Adjust to calibrate displayed room temperature to match actual room temperature.
Press the or to select.
Press to advance to the next screen.
18. Maximum Cycles Allowed Per Hour (- -, 2-6)
= as many as needed, 2-6 = maximum cycles/hour
Press or to select.
Press to advance to the next screen.
COOL
CONFIG
VACATION
COOL
CONFIG
VACATION
HEAT
CONFIG
CONFIG
CONFIG
17