Safety Instructions - MBM AeroFold 1500S Operation Manual

Safety Instructions

Definition of Symbols and Notes
The following names and signs stand for possible dangers.
Danger
This symbol stands for immediate danger. Disregarding these instructions may cause severe injury.
Caution
This symbol stands for a potentially dangerous situation. Disregarding these instructions may lead to
injuries or damage to property.
Make sure that the machine is electrically grounded to prevent electrical shock.
Operate the machinery within reasonable voltage range.
lower voltage is used, or if an electric current is utilized with a frequency not within the range stated
above.
Do not place any object on top of this machine. There is a risk of electrical shock or fire if water or any
foreign object enters the machine.
Handle the power cord with care. There is a risk of electrical shock or fire if the cord is damaged, broken,
or placed under a heavy object.
Do not insert or remove the power plug when water is present.
Do not remove the cover of this machine. There is a risk of an electrical shock.
Do not reconfigure the electronics of this machine. There is a risk of an electrical shock or fire.
Do not operate the machine if it is emitting smoke or a strange odor. Turn off the machine, unplug it from
the outlet and contact your dealer.
Do not operate the machine if the power cord is generating heat or emits a strange smell. Turn off the
machine, unplug it from the outlet and contact your dealer.
If a foreign object enters into the machine, turn off the power switch and unplug the power plug, then
consult your dealer.
In the event of a thunderstorm, unplug the machine.
Caution
Keep hair, clothing, and jewelry away from the machine while operating. Serious injury may result.
Do not put the machine on an unstable or slanted surface. Doing so may cause the machine to drop or fall
over, causing damage and possible injury.
Store and operate the machine in a clean, dust-free environment with low humidity. Avoid areas with high
moisture, extreme temperatures and excessive dust, as these conditions may cause machine failure or
electrical shock.
Operate the machine at the temperature of 5 degrees to 35 degrees C.
Be sure to grasp the power cord by the plug when unplugging it from the electrical outlet. Not doing so may
cause damage to the cord and possible electrical shock or fire.
Be sure to pull the power plug out of the electric outlet before moving the machine. Not doing so may cause
damage to the cord and possible electrical shock or fire.
Unplug the power plug from the electrical outlet when this machine is not in use.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Danger
There is a risk of electrical shock or fire if a higher or
4
www.WhitakerBrothers.com