Page 6
Auxiliary paper unit 95K-12040 40081 40250 40091...
Page 8
Spring clutch adjustment loosen Screw A and Screw B and move the solenoid bracket height until t the latch is 90 to the clutch spring cover. Clutch spring cover Latch Screw A Screw B Screw C Solenoid bracket When the machine start the feed paper. The Latch will be release the Clutch spring cover. 1 - 1.5mm Loosen Screw C and adjust the Solenoid up or down until the gap between the Latch and Clutch Spring Cover is 1mm to 1.5mm.
Page 9
Control panel cover remove the control panel cover. ( stacker...
Page 13
Black Soleniod Black Black Black CLUTCH AC Power supply board Main board...
Need help?
Do you have a question about the 87M and is the answer not in the manual?
Questions and answers