(B) Setting Of Table 1 - MBM AeroFold 1500S Operation Manual

(B) Setting of Table 1

Slide Table 1 bracket (RH&LH) slowly to diagonal direction
along the guide of the main machine body.
Guide
Table 1 guide on the operator side
The Table 1 connector is set on the operator's side. Give
caution not to damage the connector when installing the
Table 1.
Connector
Table 1 Guide
Table 1 guide on the opposite side of the operator.
Lock Lever
Install Table 1 to the main machine body securely and fix it
using the lock levers located on both sides. (Move top of the
lock lever to the arrow direction as shown in the right figure.)
13
www.WhitakerBrothers.com