Safety Instructions - MBM 208J Operation Manual

Definition of Symbols and Notes
The following names and signs stand for possible dangers:
Danger
This symbol stands for immediate danger. Disregarding these instructions may
cause severe injury.
Caution
This symbol stands for a potentially dangerous situation. Disregarding these
instructions may lead to injuries or damage to property.
Make sure that the machine is electrically grounded to prevent electrical shock.
Use the machine at 100-240 VAC with a frequency of 50-60Hz. There is a risk of electrical
shock or fire if a higher or lower voltage is used, or if an electric current is utilized with a
frequency not within the range stated above.
Do not place any object on top of this machine. There is a risk of electrical shock or fire if water
or any foreign object enters the machine.
Handle the power cord with care. There is a risk of electrical shock or fire if the cord is
damaged, broken, or placed under a heavy object.
Do not insert or remove the power plug when water is present.
Do not remove the cover of this machine. There is a risk of an electrical shock.
Do not reconfigure the electronics of this machine. There is a risk of an electrical shock or fire.
Do not operate the machine if it is emitting smoke or a strange odor. Turn off the machine,
unplug from the outlet and contact your dealer.
Do not operate the machine if the power cord is generating heat or emits a strange smell. Turn
off the machine, unplug from the outlet and contact your dealer.
If a foreign object enters into the machine, turn off the power switch and remove the power
plug, then consult your dealer.
In the event of a thunderstorm, unplug the machine.
Keep hair, clothing, and jewelry away from the machine while operating. Serious injury may
result.
Do not put the machine on an unstable or slanted surface. Doing so may cause the machine to
drop or fall, causing damage and possible injury.
Store and operate the machine in a clean, dust-free environment with low humidity. Avoid areas
with high moisture, extreme temperatures and excessive dust, as these conditions may cause
machine failure or electrical shock.
Be sure to grasp the power cord by the plug when removing from the electrical outlet. Not doing
so may cause damage to the cord and possible electrical shock or fire.
Be sure to pull the power plug out of the electric outlet before moving the machine. Not doing so
may cause damage to the cord and possible electrical shock or fire.
Remove the power plug from the electrical outlet when this machine is not in use.

Safety Instructions

Danger
Caution
2