Table 9-1 Case 1 - General Industrial; Table 9-2 Case 2 - Filtered Industrial - Siemens micromaster 410 Operating Instructions Manual

Issue 04/02
9.1.4 General cases of EMC performance
Three General cases of EMC performance are available as detailed below:
Case 1: General Industrial
Compliance with the EMC Product Standard for Power Drive Systems EN 61800-3
for use in Second Environment (Industrial) and Restricted Distribution.
Table 9-1
EMC Phenomenon
Emissions:
Radiated Emissions
Conducted Emissions
Immunity:
Electrostatic Discharge
Burst Interference
Radio Frequency Electromagnetic Field EN61000-4-3
Case 2: Filtered Industrial
This level of performance will allow the manufacturer/assembler to self-certify their
apparatus for compliance with the EMC directive for the industrial environment as
regards the EMC performance characteristics of the power drive system.
Performance limits are as specified in the Generic Industrial Emissions and
Immunity standards EN 50081-2 and EN 61000-6-2.
Table 9-2
EMC Phenomenon
Emissions:
Radiated Emissions
Conducted Emissions
Immunity:
Supply Voltage Distortion
Voltage Fluctuations, Dips, Unbalance,
Frequency Variations
Electrostatic Discharge
Burst Interference
Radio Frequency Electromagnetic
Field, amplitude modulated
MICROMASTER 410 Operating Instructions
6SE6400-5EA00-0BP0
Case 1 - General Industrial
Standard
EN 55011
EN 61800-3
EN 61000-4-2
EN 61000-4-4
Case 2 - Filtered Industrial
Standard
EN 55011
EN 61800-3
EN 61000-2-4
EN 61000-2-1
EN 61000-4-2
EN 61000-4-4
EN 61000-4-3
9 Electro-Magnetic Compatibility
Level
Level group 1, class A
Limits are weaker as EN55011, class A,
group 1
8 kV air discharge
2 kV power cables (Level 3),
1 kV control (Level 3)
26-1000 MHz, 10 V/m
Level
Level group 1, class A
Level are weaker as EN55011 class A,
group 1
8 kV air discharge
2 kV power cables (Level 3),
2 kV control (Level 4)
80-1000 MHz, 10 V/m, 80% AM,
power and signal lines
71