To Set Up The Screen Saver - Agilent Technologies 54621A User Manual

Utilities

To set up the screen saver

To set up the screen saver
The oscilloscope can be configured to turn on a display screen saver when the
oscilloscope has been idle for a specified length of time.
1 Press the key, press the
Utility
softkey to display the screen saver menu.
Screen saver Screen saver
image time set
2 Press the softkey to select the screen saver type.
Saver
The screen saver can be set to Off , to display any of the images shown in the
list, or can display a user-defined text string.
If User was selected. Spell selects a character to put in the highlighted position
shown in the "Text =" line above the softkeys.
User-defined
text string
a You may position the highlight on any character in the text string by
successively pressing the Enter key.
b Press the Spell softkey, then turn the Entry knob to choose from a list of
characters to enter in your user-defined text string.
c Press the Enter softkey to advance to the next character in the text string.
Pressing Enter saves the character shown in the Spell softkey to the character
position highlighted in the "Text =" line above the softkeys. The highlight
then advances to the next character position in the text string. The text string
can be up to 35 characters long.
6-12
softkey, then press the
Options
Preview
List of characters displayed
when Entry knob is turned
Spell
Screen Svr
Return to
previous menu
Enter