To Use Delayed Sweep - Agilent Technologies 54621A User Manual

Making Measurements

To use delayed sweep

To use delayed sweep
You can use the delayed sweep window to locate and horizontally expand part
of the main sweep for a more detailed (high-resolution) analysis of signals.
1 Connect a signal to the oscilloscope and obtain a stable display.
2 Press the
3 Press the
These markers define the
beginning and end of the
delayed sweep window
Main sweep
window
Delayed sweep
window
Delayed sweep display
5-4
key.
Main/Delayed
softkey.
Delayed
Time/div for
delayed sweep
Select main or
delayed sweep
Time/div for
Delay time momentarily
main sweep
displays when the delay
time knob is turned
Set trigger point time
reference to left, right
or center