To Change The Logic Threshold For Digital Channels - Agilent Technologies 54621A User Manual

To change the logic threshold for digital channels

1 Press the D15 Thru D8
2 Press the Threshold
to define your own threshold.
User
Logic family Threshold Voltage
TTL 1.4 V
CMOS 2.5 V
ECL –1.3 V
User Variable from –8 V to +8 V
The threshold you set applies to all channels within the selected D15 Thru D8 or
D7 Thru D0 group. Each of the two channel groups can be set to a different
threshold, if desired.
Values greater than the set threshold are high (H) and values less than the set
threshold are low (L).
3 When the Threshold
the Entry knob to set the logic threshold voltage for the channel group.
MegaZoom Concepts and Oscilloscope Operation
To change the logic threshold for digital channels
key or D7 Thru D0 key.
softkey, then select a logic family preset or select
softkey is set to User , press the User softkey, then turn
4-37