Loading an updated language file from floppy disk
When updates occur, an updated language file can be downloaded from:
www.agilent.com/find/5462xsw for the 54620-series or
www.agilent.com/find/5464xsw for the 54640-series,
or call an Agilent center and request a language disk for your instrument.
1 Insert the floppy disk containing the language file into the floppy disk
drive on the oscilloscope.
2 Press the
key, then press the
Utility
Language menu.
3 Press the
Load Languages
the oscilloscope.
4 Press the
Language
For more information about loading languages, refer to the "Utilities" chapter.
Loading an updated language file from floppy disk
Language
softkey to load the updated language file into
softkey and select the language to be viewed.
Getting Started
softkey to display the
1-27