Mounting; Orientation; Rigging - Chauvet EVE E-50Z User Manual

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the

Orientation

The EVE E-50Z may be mounted in any position; however, make sure adequate ventilation is provided
around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product's
weight. See the Technical Specifications
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
Mounting Bracket
Bracket
Adjustment Knob
Page 6 of 13
for weight information.
EVE E-50Z User Manual Rev. 1
S
ETUP
Safety Notes.
Mounting Clamp
(such as CLP-15 or CLP-15N
from Chauvet)
Safety Cable
(such as CH-05 from
Chauvet)