Mercury 40 JET FOURSTROKE Operation, Maintenance & Installation Manual page 101

OUTBOARD INSTALLATION
Route the remote wiring harness through the rubber grommet. Connect the 14
pin connector to the engine harness. Fasten the harness with the retainer.
b
a
a - Remote wiring harness
b - Retainer
c - 14 pin connector
THROTTLE CABLE INSTALLATION
Install the cables into the remote control following the instructions provided with
the remote control.
1. Place the throttle cable on the throttle lever pin and lock in place with the
retainer.
eng
c
91
41029