Leg" - Automatic Thermal Disinfection - joule HEATBANK Operating And Installation Manual

4.8.3 "LEG" - AUTOMATIC THERMAL DISINFECTION

4.8.3 "LEG" - AUTOMATIC THERMAL DISINFECTION
The "Leg" function allows you to activate/deactivate thermal disinfec-
The "Leg" function allows you to activate/deactivate thermal disinfection.
tion . This process is used to kill bacteria and must be performed by the
This process is used to kill bacteria and must be performed by the user at
user at least once a week .
least once a week.
This function is deactivated on the appliance at the factory . When the
This function is deactivated on the appliance at the factory. When the
disinfection is activated, all other settings are temporarily suspended .
disinfection is activated, all other settings are temporarily suspended.
WARNING Risk of scalding!
WARNING: Risk of scalding!
Hot water can lead to severe scalding . Only schedule thermal disin-
Hot water can lead to severe scalding. Only schedule thermal disinfection for periods outside normal usage times.
fection for periods outside normal usage times . Inform occupants of
Inform occupants of the building of the danger of scalding and always monitor the thermal disinfection process. Install
the building of the danger of scalding and always monitor the thermal
a thermostatic DHW mixer.
disinfection process . Install a thermostatic DHW mixer .
The disinfection takes max. 48 h. During the first 24 hours, the appliance is in the "Combi" operating mode. If it does
The disinfection takes max. 48 h. During the first 24 hours, the appli-
not reach 70 °C, the appliance switches to the "Full" operating mode for the next 24 hours.
ance is in the "Combi" operating mode. If it does not reach 70 °C, the
appliance switches to the "Full" operating mode for the next 24 hours .
Activating the automatic "Leg" function
Activating the automatic "Leg" function
• Call up the "Leg" function and press "OK". "man " flashes on the display.
• Press "+". "auto" flashes on the display.
• Call up the "Leg" function and press "OK". "man " flashes on the
• Press "OK". The "Leg" function is activated and the first day of the week flashes.
display .
• Set the day of the week for disinfection. Select the day using the "+" and "-" buttons.
• Press "+". "auto" flashes on the display.
•
Press "OK".
• Press "OK". The "Leg" function is activated and the first day of the
• Set the time for disinfection.
week flashes.
• Select the time using the "+" and "-" buttons.
• Set the day of the week for disinfection. Select the day using the
•
Press "OK".
"+" and "-" buttons. • Press "OK".
• Set the time for disinfection.
As soon as the temperature reaches 70 °C, the appliance switches back to the previously set operating mode.
• Select the time using the "+" and "-" buttons.
• Press "OK".
Activating the manual "Leg" function
As soon as the temperature reaches 70 °C, the appliance switches
• Call up the "Leg" function and press "OK".
back to the previously set operating mode .
• "man" flashes on the display.
•
Press "OK". The "Leg" function is active.
Activating the manual "Leg" function
As soon as the temperature reaches 70 °C, the appliance switches back to the previously set operating mode.
• Call up the "Leg" function and press "OK".
• "man" flashes on the display.
Cancelling the "Leg" function.
• Press "OK". The "Leg" function is active.
• Call up the "Leg" function and press "OK". "man" flashes on the display.
As soon as the temperature reaches 70 °C, the appliance switches
• Press "+" until the display shows "LstP".
back to the previously set operating mode .
•
Press "OK". The current Legionella program is cancelled.
Cancelling the "Leg" function.
This only ends the current program; the weekly repetition is still active.
• Call up the "Leg" function and press "OK". "man" flashes on the
display .
• Press "+" until the display shows "LstP".
• Press "OK". The current Legionella program is cancelled.
This only ends the current program; the weekly repetition is still active.
26
www.joule.ie
23