P1", "P2" And "P3" Operating Modes; Full" Operating Mode; Off" Operating Mode; Mode" Submenu - Heating Mode - joule HEATBANK Operating And Installation Manual

4.6.2 "P1", "P2" AND "P3" OPERATING MODES

4.6.2 "P1", "P2" AND "P3" OPERATING MODES
"P1" operating mode selecting this menu causes the appliance to run
according to the factory-set operating times . "P2" and "P3" operating
"P1" operating mode selecting this menu causes the appliance to run according to the factory-set operating times.
modes Selecting this menu causes the appliance to run according to
"P2" and "P3" operating modes Selecting this menu causes the appliance to run according to the user-set operating
the user-set operating times .
times.

4.6.3 "FULL" OPERATING MODE

4.6.3 "FULL" OPERATING MODE
In this operating mode, two heat appliances are used at the same time:
In this operating mode, two heat appliances are used at the same time: the
the heat pump and the electric booster heater .
heat pump and the electric booster heater.
The appliance performance decreases in "Full" operating mode . For
The appliance performance decreases in "Full" operating mode. For this
this reason, it must only be used when the water temperature needs to
reason, it must only be used when the water temperature needs to be
be increased rapidly .
increased rapidly.
The water temperature can be set to between 30 °C and 70 °C.
The water temperature can be set to between 30 °C and 70 °C.
Both heat appliances are used at the same time until the desired tem-
perature is reached . Only the electric booster heater is used at tem-
Both heat appliances are used at the same time until the desired temperature
peratures above 60 °C. The display shows "Full" until the desired tem-
is reached. Only the electric booster heater is used at temperatures above 60
perature is reached .
°C. The display shows "Full" until the desired temperature is reached.
4.6.2 "P1", "P2" AND "P3" OPERATING MODES
As soon as the set DHW temperature is reached, the appliance switch-
As soon as the set DHW temperature is reached, the appliance switches from
es from the "Full" operating mode back to the previously set operating
"P1" operating mode selecting this menu causes the appliance to run according to the factory-set operating times.
the "Full" operating mode back to the previously set operating mode. "Quick"
mode. "Quick" activation of the "Full" operating mode • Press and hold
"P2" and "P3" operating modes Selecting this menu causes the appliance to run according to the user-set operating
activation of the "Full" operating mode • Press and hold the "+" and "-"
the "+" and "-" buttons for more than 3 seconds .
times. buttons for more than 3 seconds.

4.6.4 "OFF" OPERATING MODE

4.6.4 "OFF" OPERATING MODE 4.6.3 "FULL" OPERATING MODE
In this operating mode, the appliance is switched off. If necessary, the
In this operating mode, two heat appliances are used at the same time: the
In this operating mode, the appliance is switched off. If necessary, the electric
electric booster heater is switched on by itself for the frost protection
booster heater is switched on by itself for the frost protection function. heat pump and the electric booster heater.
function .
The appliance performance decreases in "Full" operating mode. For this
Frost protection
Frost protection
reason, it must only be used when the water temperature needs to be
4.6.2 "P1", "P2" AND "P3" OPERATING MODES
The electric booster heater starts up when the water temperature in
increased rapidly.
The electric booster heater starts up when the water temperature in the
the cylinder falls to 5 °C and switches off again when the temperature
cylinder falls to 5 °C and switches off again when the temperature reaches
"P1" operating mode selecting this menu causes the appliance to run according to the factory-set operating times.
reaches 8 °C.
The water temperature can be set to between 30 °C and 70 °C.
8 °C.
"P2" and "P3" operating modes Selecting this menu causes the appliance to run according to the user-set operating
times.
4.7 Both heat appliances are used at the same time until the desired temperature

"MODE" SUBMENU - HEATING MODE

4.7 "MODE" SUBMENU - HEATING MODE
is reached. Only the electric booster heater is used at temperatures above 60
4.6.3 "FULL" OPERATING MODE
°C. The display shows "Full" until the desired temperature is reached. 3 different types of heating mode can be selected in the "Mode" submenu.
3 different types of heating mode can be selected in the "Mode" sub-
• Electrical heating mode
In this operating mode, two heat appliances are used at the same time: the
menu .
As soon as the set DHW temperature is reached, the appliance switches from
• "Heat pump" operating mode
heat pump and the electric booster heater.
• Electrical heating mode
• the "Full" operating mode back to the previously set operating mode. "Quick" "Combi" operating mode
• "Heat pump" operating mode
activation of the "Full" operating mode • Press and hold the "+" and "-"
The appliance performance decreases in "Full" operating mode. For this
• "Combi" operating mode
buttons for more than 3 seconds.
reason, it must only be used when the water temperature needs to be
increased rapidly.
4.6.4 "OFF" OPERATING MODE
The water temperature can be set to between 30 °C and 70 °C.
In this operating mode, the appliance is switched off. If necessary, the electric
booster heater is switched on by itself for the frost protection function.
Both heat appliances are used at the same time until the desired temperature
is reached. Only the electric booster heater is used at temperatures above 60
Frost protection
°C. The display shows "Full" until the desired temperature is reached.
The electric booster heater starts up when the water temperature in the
As soon as the set DHW temperature is reached, the appliance switches from
cylinder falls to 5 °C and switches off again when the temperature reaches
the "Full" operating mode back to the previously set operating mode. "Quick"
8 °C.
activation of the "Full" operating mode • Press and hold the "+" and "-"
buttons for more than 3 seconds.
4.7 "MODE" SUBMENU - HEATING MODE
4.6.4 "OFF" OPERATING MODE
3 different types of heating mode can be selected in the "Mode" submenu.
• Electrical heating mode
In this operating mode, the appliance is switched off. If necessary, the electric
• "Heat pump" operating mode
booster heater is switched on by itself for the frost protection function.
• "Combi" operating mode
Frost protection
The electric booster heater starts up when the water temperature in the
cylinder falls to 5 °C and switches off again when the temperature reaches
22
8 °C.
4.7 "MODE" SUBMENU - HEATING MODE
www.joule.ie
19