Installation; Packing And Unpacking; Planning Of System Installation - AMBROGIO 6060BA0 User Manual

INSTALLATION

The equipment is delivered suitably packaged. When unpacking, carefully remove and check the integrity of the parts.
Warning – Caution
Keep plastic wrapping and plastic containers away from infants and children: risk of suffocation!
Important
Keep the packaging materials for future use.
The robot is not difficult to install, but requires some preliminary planning in order to define the best area for installing the power
supply unit.
Position the power supply unit in an easy to access zone.
-
The power supply unit must be in a well-ventilated area,
protected from direct sunlight and exposure to the elements.
-
The power supply unit must not be in direct contact with the
ground or humid environments.
Warning – Caution
Position the power supply unit in an area that
cannot be reached by children. For example, at a
height above 160 cm (63 ").
Warning – Caution
When connecting the electricity, it is necessary that a power outlet is positioned near the installation area.
Make sure the connection to the mains power complies with the applicable laws. To operate in complete
safety, make sure the electrical system, which is connected to the power supply unit, is equipped with a well-
functioning earthing system. The supply circuit shall be protected by a residual current device (RCD) with a
tripping current of not more than 30 mA.
Important
It is advisable to install the unit in a cabinet for electric components (for outdoor or indoor use), equipped
with a key lock, and well-ventilated to maintain a correct air circulation.
Warning – Caution
Make sure only authorised people have access to the power supply.

PACKING AND UNPACKING

PLANNING OF SYSTEM INSTALLATION

9
EN
User's manual