Adjustments; Adjustment Recommendations; Adjustment Of Cutting Height - AMBROGIO 6060BA0 User Manual

ADJUSTMENTS

Important
The user must follow the procedures described in this manual when making
any adjustment which is not expressly indicated
indicated in this manual, must only be carried out by personnel from the Manufacturer's Authorised Service
Centres.
1. Stop the robot safely by pressing the "ON/OFF" key (see
"Robot safety stop").
2. Turn over the robot and position it so as not to ruin the
covering hood.
Important
Use protective gloves to prevent injury to your
hands.
3. Unscrew the screws to remove the blade.
4. Insert or remove the spacer to adjust the cutting height.
5. Reposition the blade and fasten the screws.
6. Turn the robot over to its operating position.
Important
Reduce the cutting height gradually. It is recommended to add the spancer every 2÷3 days until the ideal
height of the grassy surface is reached gradually.

ADJUSTMENT RECOMMENDATIONS

in this manual. Any special adjustments, not expressly

ADJUSTMENT OF CUTTING HEIGHT

15
any adjustments. Do not make
INSERT SPACER AND BLADE WITH SCREWS
check that the slope of the blade,
with the robot in the start position,
is facing downwards.
EN
User's manual