AMBROGIO 6060BA0 User Manual page 19

GRASS SENSOR OFF - CURB DROP-OFF SENSOR ON
Keep the "PLAY/PAUSE" button pressed
for 4 seconds.
4 sec.
Grass Sensor On – Curb drop-off sensor Off:
Press the "PLAY/PAUSE" button and keep it pressed for 8 seconds
until 3 consecutive beeps are heard and the PAUSE led flashes
three times. This mode must only be used on models with the curb
drop-off sensor installed, and it allows working with just the front
grass detector sensors. This mode is recommended with uneven
surfaces with lots of sharp dips or sparse grass.
Danger - Attention
The robot requires more space with this mode to change the direction. Respect the distances that are given
for models without the curb drop-off sensor.
GRASS SENSOR ON CURB DROP-OFF SENSOR OFF
Keep the "PLAY/PAUSE" button pressed
for 8 seconds.
8 sec.
Wait for
+
2 beeps 2 flashes
Wait for
+
3 beeps 3 flashes
19
Release the button
GRASS SENSOR
Minimum width 25 cm / 9.8 "
Release the button
User's manual
EN